Description
Personalized Sculptures Door Mats product features:
- No Art Charges and no Set-up Fees!
- Non-skid heavy-duty rubber backing.
- Minimum order is 1 mat.
- Include up to 10 characters (including spaces)
- 100% UV polypropylene fabric will not fade in sunlight and holds up to 1.5 gallons of water per square yard.
- Logo is permanently molded into the material and will not crush.
- Easy to clean! Simply vacuum, steam clean, extraction clean or hose off.
- These mats are perfect for closing gifts for real estate agents and home builders, “Thank You” gifts for your best customers, golf tournament participants, High-end hotels and resorts, apartment complexes, incentive programs and much more.
- 2 styles and 18 colors available for Personalized Sculptures Door Mats.
Details
Size available: 2′ x 3′ (No custom sizes)
$53.15 each
Sculpture Styles
Specs
GENERAL SPECIFICATIONS: |
SURFACE |
|
FIBER TYPE: |
BCF nylon, 4×4 twist, 2 ply twist heat set |
HEIGHT: |
7/16 in. |
WEIGHT: |
26 oz. per square yard |
CONSTRUCTION: |
Cut Pile |
BACKING |
|
PRIMARY: |
Non-woven Polyester |
SECONDARY: |
100% SBR Rubber (20% Recycled)
Thickness: .060″
Durometer: 60 |
CLEANING INSTRUCTIONS
1. Vacuum Daily
When possible, Waterhog mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
2. Routine Maintenance
Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time.
3. Deep Cleaning
Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service.
4. Floor Preparation
Prior to the mat being put back into service, Logo Mats recommends that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
Reviews
There are no reviews yet.