Description
WaterHog ECO Premier Tile product features:
- For high traffic, indoor and outdoor use.
- Exclusive rubber reinforced face nubs prevent pile from crushing in high traffic areas.
- Tiles can be cut. Professional installation recommended.
- Tile size – 18″ x 18″; 1/4″ thickness
- Three surface patterns: Diagonal, Diamond, Geometric
- Certified slip-resistant by the NFSI.
Details
Additional WaterHog Mat Benefits
1. Premium 24 oz/sq. anti-static Polypropylene fiber system dries quickly and won’t fade or rot. When wet, the rubber reinforce surface allows water to be wicked to the bottom of the mat away from foot traffic while providing a slip resistant surface.
2. Polypropylene fiber system dries quickly and is suitable for indoor or outdoor use.
3. Colorfast: Solution dyed for excellent light and wet fastness.
4. Unique ridged construction effectively stores dirt and moisture beneath shoe level.
5. Exclusive “Water Dam” border keeps dirt and water in the amt and off the floor, minimizing slip hazards and floor damage.
6. Green friendly rubber backing has 20% recycled rubber content and is available in smooth or cleated types.
7. Exclusive rubber reinforced face nubs prevent pile from crushing in high traffic areas, thereby maintaining high performance and extending product life.
8. Should not be used in areas exposed to animal fats (kitchens) or petroleum products.
9. Not adversely effected by salt or ice melt.
10. Certified slip-resistant by the National Floor Safety Institute.
11.Recommended uses for computer rooms, around electronic equipment, malls, banks, hotels, offices, restaurants, healthcare, supermarkets and more.
12. Easy to clean: Just vacuum or hose off and hang to dry.
13. Anti-static: Waterhog mats have a maximum average voltage of 1.6 KV as measured by the AATCC 134 Electrostatic Propensity Test and meets IBM’s resistance (NFPA99). Waterhog mats are safe for use in computer rooms and around electronic equipment.
Cleaning
CLEANING INSTRUCTIONS
1. Vacuum Daily
When possible, Waterhog mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
2. Routine Maintenance
Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time.
3. Deep Cleaning
Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service.
4. Floor Preparation
Prior to the mat being put back into service, Logo Mats recommends that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
Reviews
There are no reviews yet.