Contact Us
Shopping Cart
From $39.85
WaterHog MAX Diamond mats combine all of the performance of the original WaterHog with a unique diamond face pattern creating the ultimate visual appearance. WaterHog MAX Diamond mats feature a 100% post consumer recycled PET face that is reclaimed from plastic bottles. Every 3×5 diverts approximately 60 plastic bottles from landfills. A multi-denier fiber construction combines thick fibers for scraping with fine fibers for wiping, providing better performance and longer life.
View Price Chart
View Color Options
WeldSafe Welding Mat
From $58.90
Bar Rail Counter Logo Mats
From $34.55
WaterHog Squares Entrance Mat
From $29.95
ProForm Custom Entrance Matting
G-Floor Large Coin Pattern
From $175.00
WaterHog MAX Diamond Mats product features:
| Weight | N/A |
|---|---|
| Size | 2' x 3', 3' x 4', 3' x 5', 3' x 8.4', 3' x 10', 3' x 12.2', 3' x 16', 3' x 20', 4' x 6', 4' x 8.4', 4' x 10', 4' x 12.2', 4' x 16', 4' x 20', 6' x 6', 6' x 8.4', 6' x 12.2', 6' x 16', 6' x 20' |
| Border | Rubber Borders, Matching Fabric Borders |
| Backing | Gripper for Carpeted Surfaces, Smooth for Smooth Surfaces |
| Colors | Black Smoke, Chestnut Brown, Gray Ash, Indigo, Khaki, Maroon, Southern Pine |
Black Smoke
Chestnut Brown
Gray Ash
Indigo
Khaki
Maroon
Southern Pine
Additional WaterHog Mat Benefits
1. Indoor/Outdoor: Durable PET polyester face suitable for indoor or outdoor use. 100% recycled PET polyester fiber system dries quickly preventing fading and rotting.
2. Raised NUB surface: Removes and traps dirt and moisture and holds it on mat below shoe level so it is not tracked in.
3. Colorfast: Solution dyed for excellent light and wet fastness.
4. Rubber backing: Lays flat, won’t crack or curl like vinyl mats.
5. Exclusive “Water Dam” border keeps dirt and water in the mat and off the floor, minimizing slip hazards and floor damage.
6. Green friendly rubber backing has 15% recycled rubber content and is available in smooth or cleated types.
7. Exclusive rubber reinforced face nubs prevent pile from crushing in high traffic areas, thereby maintaining high performance and extending product life.
8. Should not be used in areas exposed to animal fats (kitchens) or petroleum products.
9. Not adversely effected by salt or ice melt.
10. Certified slip-resistant by the National Floor Safety Institute.
11. Recommended uses for computer rooms, around electronic equipment, malls, banks, hotels, offices, restaurants, healthcare, supermarkets and more.
12. Easy to clean: Just vacuum or hose off and hang to dry.
13. Special TriGrip cleated 100% rubber backing to minimize mat movement. Also available with smooth back for hard surfaces.
14. Passes Flammability Standard DOC-FF-1-70
| GENERAL SPECIFICATIONS: | |
| SURFACE | |
| FIBER TYPE: | Solution-dyed polypropylene, recycled PET polyester, recycled from soda bottles |
| NUB HEIGHT: | 1/4″ and 7/17″ |
| WEIGHT: | 30 ozs. per square yard |
| DESIGN: | Diamond |
| BACKING | |
| TYPE: | 100% SBR Rubber (15% Recycled Content) |
| THICKNESS: | .190″ – Nubs .050″ – Between Nubs .160″ – Border |
| DUROMETER: | 60 |
| TENSIL: | 600 PSI |
| TESTING | Passes Flammability Standard DOC-FF-1-70 |
| Anti-Static rating averaging 1.2 KV with a maximum average voltage of 1.63 KV as measured by the AATCC 134 Electrostatic Propensity Test and meets IBM’s minimum standard for electrical resistance (NFPA99). | |
1. Vacuum Daily
When possible, Waterhog mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
2. Routine Maintenance
Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time.
3. Deep Cleaning
Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service.
4. Floor Preparation
Prior to the mat being put back into service, Logo Mats recommends that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
Grip-R non-slip coating is a water-based, eco-bio friendly formula to prevent movement or slipping in a wide range of surfaces including anti -fatigue mats, ergo mats, rugs, floor mats, and carpet tiles. Grip-R is applied to the underside of the mat or rug. It can provide safety to your family, employees and customers by eliminating mat movement for indoor and outdoor applications and prevent slip and fall accidents.
Exceptional performance and exceptional beauty. An amazing mat series with two great features: an innovative rubber-reinforced face design for added beauty, and a green friendly face constructed of 100% post consumer recycled P.E.T. polyester fiber system that is reclaimed from plastic bottles providing a mat surface with an attractive look that’s easy to maintain.
WaterHog Max Grand Half Oval is configured as a half oval design.
View Price Chart
View Color Options
Exceptional performance and exceptional beauty. An amazing mat series featuring an innovative rubber-reinforced face design for added beauty, and a green friendly face constructed of 100% post consumer recycled P.E.T. polyester fiber system that is reclaimed from plastic bottles providing a mat surface with an attractive look that’s easy to maintain.
WaterHog Max Grand One End is configured as a rectangle with half an oval on one end.
Versatile roll good product designed to be flexible. This product is ideal for large area installations and features a Herringbone, rubber reinforced, bi-level surface. WaterHog Max Roll Goods can be installed permanently or loose laid, and is available with or without the borders. These mats can be seamed side by side to create wider mats up to 12′ x 50′. WaterHog Max Roll Goods can also be produced with logo designs on the mat.
Please call for a custom quote or use our Custom Request form!
The WaterHog Squares Entrance mat features a non-skid heavy-duty rubber backing which is designed for high traffic, indoor and outdoor entrances. The exclusive “Water Dam” border keeps dirt and water in the mat and off the floor, minimizing slip hazards and floor damage. The 100% UV polypropylene fabric will not fade in sunlight and holds up to 1.5 gallons of water/sq. yd. WaterHog Entrance mat has a raised NUB surface that removes and traps dirt and moisture and holds it on the mat below shoe level so it is not tracked in. The Waterhog Squares mat can be ordered with a rubber border edge or a matching fabric edge.
Reviews
There are no reviews yet.